Thinstall Virtualization Suite v3.350

Thinstall Studio은 설치형태의 프로그램을 가상 포터블 프로그램으로 만들어 줍니다

[사용방법]
1. 프로그램을 다운받아 설치하세요
2. 포터블로 만들고자 하는 프로그램(웹마)을 준비합니다.
3. Setup capture.exe을 실행하고 다른 열린창은 모두 닫습니다.
   (레지및 파일에 영향을 주기때문입니다.)





4. SetupCapture에서 Start를 클릭하면 아래와 같은 화면이 나옵니다. 그냥 무시하고 진행합니다
    지금은 "웹마" 프로그램 설치전입니다.

    이 화면에서 Pre-install San >>을 클릭합니다.
    (타켓 프로그램[웹마]을 실행합니다)



5. 스캔이 끝나면 아래와 같은 화면이 나옵니다.
6. 이 과정이 끝나면 이제 마지막단계인 프로그램 설치후 변화된 파일및 레지를 저장하는 과정입니다. Save를 눌러 저장하고 나서 저장한 폴더를 찾아갑니다.

  

빨간색 부분이 새로 생긴 파일 및 폴더입니다
Captures - WebMa2 폴더안으로 들어가 봅니다.



빨간색으로 표시한 부분은 삭제해도 무방합니다.

Package.ini 수정 전과 수정 후의 파일 비교
(새로 생긴 파일을 하나로 합쳐는 정보를 담고 있습니다.)

 

[Compression]
CompressionType=None
;CompressionType=Fast

[Isolation]
DirectoryIsolationMode=WriteCopy
;DirectoryIsolationMode=Merged

[BuildOptions]
;Enable MSIFilename if you want to generate a Windows Installer package.
;MSIFilename={0D0D1588-7145-47A9-9717-F474D6B9C4FE}.msi
;
;When generating a .msi, the following  entries are recommended but optional
;MSIManufacturer=AsUs
;MSIProductVersion=1.0
;MSIDefaultInstallAllUsers=1
;MSIRequireElevatedPrivileges=1
;MSIInstallDir={0D0D1588-7145-47A9-9717-F474D6B9C4FE} (Thinstalled)
;MSIProductCode={A5F03DCF-DB04-2632-9CCB-51A7C3E19CDF}
;MSIUpgradeCode={13A717CA-968A-0C30-92FC-AB7BA32C9642}

OriginalSnapshot=C:\DOWNLO~1\PORT_1~1.350\THINST~1.VS\{A89D7~1.SNA
DestinationSnapshot=C:\DOWNLO~1\PORT_1~1.350\THINST~1.VS\{156BC~1.SNA
CapturedUsingVersion=3.350
OutDir=bin
SandboxName={0D0D1588-7145-47A9-9717-F474D6B9C4FE}

; InventoryName is used by desktop management systems to identify packages for usage reporting purposes
InventoryName={0D0D1588-7145-47A9-9717-F474D6B9C4FE}

;;PermittedGroups allows you to restrict access to only users who belong to specific ActiveDirectory Groups
;PermittedGroups=Administrators;Remote Desktop Users

;The following option causes the sandbox to be deleted when the application exists
;This essentially resets the application to it's original captured state
;If the application spawns child processes, the clean up with be postponed until all quit
;RemoveSandboxOnExit=1

;Enable this option if you want changes for Network mapped drives to go into the sandbox
;By default users can read and write normally to network mapped drives
;SandboxNetworkDrives=1

;Enable this option if you want changes for Removable disk (floppy/flash) to go into the sandbox
;By default users can read and write normally to removable disk
;SandboxRemovableDisk=1

;Enable this option if you want Out-of-process COM objects to be loaded outside of the virtual environment
;By doing this, the application may indirectly modify the machine - for example the MSI installer service COM object
;The default is to create all Out-of-process COM objects inside the virtual environment
;VirtualizeExternalOutOfProcessCOM=0

VirtualDrives=Drive=c, Serial=252f1cf1, Type=FIXED; Drive=d, Serial=d6be91f9, Type=FIXED; Drive=e, Serial=080c1ccd, Type=FIXED; Drive=f, Serial=fc2e3b91, Type=FIXED
;VirtualDrives=Drive=a, Serial=00000080, Type=REMOVABLE; Drive=c, Serial=252f1cf1, Type=FIXED; Drive=d, Serial=d6be91f9, Type=FIXED; Drive=e, Serial=080c1ccd, Type=FIXED; Drive=f, Serial=fc2e3b91, Type=FIXED; Drive=g, Serial=fc2e3b91, Type=CDROM; Drive=h, Serial=00000000, Type=REMOVABLE

[WebMa2.exe]
ReadOnlyData=bin\Package.ro.tvr
Source=%ProgramFilesDir%\WebMa2\WebMa.exe
WorkingDirectory=%ProgramFilesDir%\WebMa2
Shortcuts=%Programs%\WebMa2;%Desktop%

[자동로그인 백업복구.exe]
Shortcut=WebMa2.exe
Source=%ProgramFilesDir%\WebMa2\Kid.exe
WorkingDirectory=%ProgramFilesDir%\WebMa2
Shortcuts=%Programs%\WebMa2

[WebMa2 삭제.exe]
Shortcut=WebMa2.exe
Source=%ProgramFilesDir%\WebMa2\uninst.exe
WorkingDirectory=%ProgramFilesDir%\WebMa2
Shortcuts=%Programs%\WebMa2

[ActiveXCompatibility.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%ProgramFilesDir%\WebMa2\ActiveXCompatibility.exe

[Kid.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%ProgramFilesDir%\WebMa2\Kid.exe

[WM137.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%ProgramFilesDir%\WebMa2\WM137.exe

[WebMa.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%ProgramFilesDir%\WebMa2\WebMa.exe

[uninst.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%ProgramFilesDir%\WebMa2\uninst.exe

[cmd.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%SystemSystem%\cmd.exe

[regedit.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%SystemRoot%\regedit.exe

[iexplore.exe]
Shortcut=WebMa2.exe
Disabled=1
Source=%ProgramFilesDir%\Internet Explorer\iexplore.exe

[Compression]

;CompressionType=None
CompressionType=Fast

[Isolation]
;DirectoryIsolationMode=WriteCopy
DirectoryIsolationMode=Merged

[BuildOptions]
;Enable MSIFilename if you want to generate a Windows Installer package.
;MSIFilename={0D0D1588-7145-47A9-9717-F474D6B9C4FE}.msi
;
;When generating a .msi, the following  entries are recommended but optional
;MSIManufacturer=AsUs
;MSIProductVersion=1.0
;MSIDefaultInstallAllUsers=1
;MSIRequireElevatedPrivileges=1
;MSIInstallDir={0D0D1588-7145-47A9-9717-F474D6B9C4FE} (Thinstalled)
;MSIProductCode={A5F03DCF-DB04-2632-9CCB-51A7C3E19CDF}
;MSIUpgradeCode={13A717CA-968A-0C30-92FC-AB7BA32C9642}

OriginalSnapshot=C:\DOWNLO~1\PORT_1~1.350\THINST~1.VS\{A89D7~1.SNA
DestinationSnapshot=C:\DOWNLO~1\PORT_1~1.350\THINST~1.VS\{156BC~1.SNA
CapturedUsingVersion=3.350
OutDir=bin
SandboxName={0D0D1588-7145-47A9-9717-F474D6B9C4FE}

; InventoryName is used by desktop management systems to identify packages for usage reporting purposes
InventoryName={0D0D1588-7145-47A9-9717-F474D6B9C4FE}

;;PermittedGroups allows you to restrict access to only users who belong to specific ActiveDirectory Groups
;PermittedGroups=Administrators;Remote Desktop Users

;The following option causes the sandbox to be deleted when the application exists
;This essentially resets the application to it's original captured state
;If the application spawns child processes, the clean up with be postponed until all quit
;RemoveSandboxOnExit=1

;Enable this option if you want changes for Network mapped drives to go into the sandbox
;By default users can read and write normally to network mapped drives
;SandboxNetworkDrives=1

;Enable this option if you want changes for Removable disk (floppy/flash) to go into the sandbox
;By default users can read and write normally to removable disk
;SandboxRemovableDisk=1

;Enable this option if you want Out-of-process COM objects to be loaded outside of the virtual environment
;By doing this, the application may indirectly modify the machine - for example the MSI installer service COM object
;The default is to create all Out-of-process COM objects inside the virtual environment
;VirtualizeExternalOutOfProcessCOM=0

VirtualDrives=Drive=c, Serial=252f1cf1, Type=FIXED; Drive=d, Serial=d6be91f9, Type=FIXED; Drive=e, Serial=080c1ccd, Type=FIXED; Drive=f, Serial=fc2e3b91, Type=FIXED
;VirtualDrives=Drive=a, Serial=00000080, Type=REMOVABLE; Drive=c, Serial=252f1cf1, Type=FIXED; Drive=d, Serial=d6be91f9, Type=FIXED; Drive=e, Serial=080c1ccd, Type=FIXED; Drive=f, Serial=fc2e3b91, Type=FIXED; Drive=g, Serial=fc2e3b91, Type=CDROM; Drive=h, Serial=00000000, Type=REMOVABLE

[WebMa2.exe]
ReadOnlyData=bin\Package.ro.tvr
Source=%ProgramFilesDir%\WebMa2\WebMa.exe

Build.bat 이파일을 클릭하면 도스창이 뜨고 Bin폴더에 포터블을 완성시켜줍니다.

invalid-file